Any friction fit, tightness or adhesion of the part of any load being lifted should be broken by wedge or tapping and not by increasing the load on the applianceAccording to this sentence, （）

The（）provides a rapid means of tallying when items of the same commodity are being loaded or unloaded in uniform drafts consisting of an equal number of pieces.

Which of the following actions are stated in the correct order prior to loading or discharging cargo on a Ro-Ro vessel? （）

（）in a charter-party are working days on which the weather allows loading work or discharging work to be done.

Project（71）is an uncertain event or condition that，if it occurs，has a positive or a negative effect on at least one project objective，such as time，cost，scope，or quality．

Project ______is an uncertain event or condition that，if it occurs，has a positive or a negative effect on at least one project objective，such as time，cost，scope，or quality．

● Project（71）is an uncertain event or condition that, if it occurs, has a positive or a negative effect on at least one project objective, such as time, cost, scope, or quality.（71）

During loading or discharging, the tallymen must make contact with（）on duty so as to solve problems in time.

During loading or discharging，the tallymen must make contact with（）on duty so as to solve problems in time.

In most cases，the mere reception or dumping down of the cargo on the ship（）involve completion of loading，because the operation of loading involves all that is required to put the cargo in a condition in which it can be carried．

In evacuation from a ship，an individual without the option of a survival craft or liferaft should enter the water on the leeward side，except when（）.

During counterflooding to correct a severe list or trim aggravated by an off-center load，a ship suddenly takes a list or trim to the opposite side. You should（）.