When the ship, its main propulsion device equipped with clutch, arrived at the port and finished with the engine, the correct operation should be______. -题库考试答案搜索网

When the ship, its main propulsion device equipped with clutch, arrived at the port and finished with the engine, the correct operation should be______.

单选题

2022-07-12 01:09

A、disengaging the clutch firstly, then stopping the main engine
B、stopping the main engine firstly, then disengaging the clutch
C、stopping the cooling water pump firstly, then stopping the main engine
D、stopping the main engine and disengaging the clutch at the same time

查看答案

正确答案

A

试题解析

标签：

感兴趣题目

Generally, runaway means such situation when the speed main engine exceeds the rating speed by its （）

When receiving a distress alert, the SAR authorities ashore and the ships in the vicinity of the ship in distress will（）soonest.

If keep the fuel injection of main engine unchanged when ship is fouled, that will causeⅠ.The speed of main engine to be reduced Ⅱ.Ship speed to be reduced Ⅲ.The resistance torque of propeller to be increased Ⅳ.Trim at stern to increase（）

Electrical supply is always needed even if only for lighting so after a ship goes into service it is extremely rare for the main bus-bars to be dead, it therefore follows that the bus-bars are continuously alive（） the life of the ship.

Propulsion of the vast majority of contemporary merchant ships (especially containerships and VLCCs) utilizes（） as prime mover.

Suppose the rated capacity of the main engine of a ship is 10,000 KW at 100 rated rpm, then when at 80 rpm its capacity should be （）.

The device that allows a floating ship to sway without bending the marine riser system is the（）.

Each fireman’s outfit and its spare equipment on a ship must be stowed（）.

Each fireman’s outfit and its spare equipment on a ship must be stowed（）.

When a ship is fully loaded, it needs to prevent the main engine to be（）.While a ship is fully empty, it needs to prevent the main engine to be（）.

When the ship, its main propulsion device equipped with clutch, arrived at the port and finished with the engine, the correct operation should be______.

As a frame leaves a Layer 3 device, the Layer 2 encapsulation information is changed from what it was when it entered the devicE.For what two reasons can this happen? （）

相关题目: What is an advantage of a steam turbine over a diesel for the main propulsion?（）; When the（）is large, the ship is stiff; and when it is small, she is tender.; When the ship security alert system is activated, it shall not（）; When you install a new device in a computer,you have to add the correct device______to the operating system to allow the computer to communicate with the device．; Deck machinery, which is also known as hull machinery, includes all power driven equipment located （）the machinery spaces that is （） with the main propulsion plant.; In order to ensure the safety of the ship and its equipment during UMS operation, certain essential functions （）.; If anything abnormal be found on the load change of main engine when the ship is entering in shallow waterway, before taking measuring the engineer on duty should （）; Which radio equipment is not necessary for the ships sailing in the sea area A2?; If you wear extra clothing when entering the water after abandoning ship it will（）.; When a ship is entering to narrow waterway and the fuel feeding of the main engine is keeping unchanged, which of the following is the wrong conclusion?（）; The load limitation of governor should be reduced when ship navigating at sea, the main reason is to（）; When a ship is entering to shallow water, ship resistance will be increased and the speed of main engine reduced.Due to the function of the governor, the main engine will（）; Whether a ship is sailing before the wind or sailing in the rough sea, we must reduce the fuel injection of the main engine.For the former one, it aims to prevent the main engine being（）, while for the later one, it aims to prevent the main engine being（）.; Control of the main propulsion diesel engines can be shifted from the engine room to the wheelhouse from the （）.; When receiving a distress alert, the SAR authorities ashore and the ships in the vicinity of the ship in distress will（）soonest.; When ship is fouled, increasing the fuel injection for keeping the normal speed will cause the main engine （）; When a ship in loaded condition floats at arbitrary water line, its displacement is to the relevant mass of water displaced by the ship（）; After a ship enters service it is（） for the main bus-bar to be made dead.; Electrical supply is always needed even if only for lighting so after a ship goes into service it is extremely rare for the main bus-bars to be dead, it therefore follows that the bus-bars are continuously alive the life of the ship.; A ship can request completion of a （） when the ship is at a higher security level than the port facility or another ship it is interfacing with.

广告位招租WX:84302438

题库考试答案搜索网

免费的网站请分享给朋友吧