The amount of moisture in a given sample of air, when compared with the amount of moisture the air could hold if totally saturated at the existing temperature of the sample, is called （）.

Water evaporates or steam condenses at the saturation temperature, which depends upon the pressure, the higher the pressure （） the saturation temperature.

The temperature difference between the inlet and outlet temperature of the lube oil cooler in the lubricating system for the diesel engine is generally between （）.

When the temperature of the refrigerant flowing out from the condenser is below the condensing temperature, it is said to be （）.

A cargo hold has been determined to have a relative humidity of 80% and a dry bulb temperature of 80 ℃ and a dry bulb temperature of 85℃.When the hold is sealed and the dry bulb temperature decreases, the relative humidity in the space will （）

The temperature differential occurring between the inlet temperature of the fluid to be cooled and the outlet temperature of the cooling medium in a shell-and-tube heat exchanger is greatest in which of the flow designs listed?（）

The flash point of a liquid refers to the temperature （）

In the refrigeration compressor the temperature of the vapor is （） by compression.

The temperature of the refrigerant in the evaporator coil depends mostly upon the （）.

The master may bind the Shipowner or Charterer（）doing such things as are necessary on the part of the one or of the other to carry out the contract.

Every deliberate act of wrongdoing by the master or any of the crew against the ship or cargo，without the authorization or privity of the Shipowner or his agent，is（）.

A salvor may be（）the whole or part of the payment due under Salvage Convention to the extent that the salvage operations have become necessary or more difficult because of fault or neglect on his part or if the salvor has been guilty of fraud or other dishonest conduct.