Assuming the default switch configuration,which approach should you use to configure the extended vlan range(1006 through 4094) on a cisco catalyst 3750 series switch?（） -题库考试答案搜索网

Assuming the default switch configuration,which approach should you use to configure the extended vlan range(1006 through 4094) on a cisco catalyst 3750 series switch?（）

单选题

2022-01-09 16:27

A、Configure the switch to be in VTP client mode.
B、Configure the switch to be in VTP domaint mode.
C、Configure the switch to be in VTP transparent mode.
D、Configure the switch to be in VTPv2.

查看答案

正确答案

C

试题解析

标签： CCNA(640-802)

感兴趣题目

The switched LAN is displayed below：

In this network， STP has been implemented. Switch SW1 is the root switch for the default VLAN.To reduce the broadcast domain， the network administrator decides to split users on the networkinto VLAN 2 and VLAN 10. The administrator issues the command spanning-tree vlan 2 rootprimary on switch SW1. What will happen as a result of this change？（）

The switched LAN is displayed below：

In this network， STP has been implemented. Switch SW1 is the root switch for the default VLAN.To reduce the broadcast domain， the network administrator decides to split users on the networkinto VLAN 2 and VLAN 10. The administrator issues the command spanning-tree vlan 2 rootprimary on switch SW1. What will happen as a result of this change？（）

A new switch is installed in the Ezonexam network. This switch is to be configured so that VLAN information will be automatically distributed to all the other Cisco Catalyst switches in the network.

Refer to the exhibit. Assume that Switch_A is active for the standby group and the standby devicehas only the default HSRP configuration. What conclusion is valid？（）

You have just issued the command user@router# save current.conf.Assuming the default settings, where in the file system is current.conf saved?（）

You have just issued the command user@router# save current.conf Assuming the default settings, where in the file system is current.conf saved?（）

A router leams about a remote network from EIGRP.OSPF. and a static route. Assuming all routing protocols are using their default administrative distance, which route will the router use to forward data to the remote network?（）

A router learns about a remote network from EIGRP, OSPF, and a static route. Assuming all routing protocols are using their default administrative distance, which route will the router use to forward data to the remote network（）。

Refer to the exhibit. Users from the Engineering VLAN complain that every time Business VLAN users have a network connectivity issue，the Engineering VLAN users usually have problems experiencing slow response or network connectivity problems. After troubleshooting， anunauthorized switch 2 was found.This unauthorized switch has been a regular problem， assuming the root bridge function under thespanning-tree domain and causing the Engineering VLAN to be unstable. Which three of these actionscould be suggested to fix the problem？（）

A new trunk has been configured on a switch in the Ezonexam LAN. By default, which VLANs are allowed over this trunk link?

Three switches are connected to one anther via trunk ports.Assuming the default switch configuration,which switch is elected as the root bridge for the spanning-tree instance of vlan 1?（）

Three switches are connected to one anther via trunk ports.Assuming the default switch configuration,which switch is elected as the root bridge for the spanning-tree instance of vlan 1?（）

相关题目: Some of the TestKing routers have been configured with default routes. What are some of the advantages of using default routes?（）; In which service component of the optimize phase would you assess the routing and switching systemand recommend activities such as optimizing device configurations, capacity planning, or traffic analysis? （）; assuming the default switch configuration which vlan range can be added modified and removed on a cisco switch?（）; Which term describes a spanning-tree network that has all switch ports in either the blocking or forwarding state?（）; Assuming default setting,how can you erase the VTP database of VLANs on a CISCO IOS switch running in VTP server mode?（）; Assuming you build networks to exact specifications, what is the recommended maximum length a 10BaseT cable can be before it has to be segmented or repeated?（）; Assuming you build networks to exact specifications, what is the recommended maximum length a 10BaseT cable can be before it has to be segmented or repeated?; You need to set the default gateway of one of your TestKing switches. Which command will set the default gateway to 192.168.12.1 on a Cisco switch?（）; What is the default value for the ENABLED attribute of a job or program when it is created? （）; A user is unable to determine the default system texteditor.
How can the local administrator assist the user by identifying the default text editor for the system?（）; In data communication, data link is those parts of two data terminal equipments that are controlled by a protocol along with the(71) data circuit, which together enable data(72). So-called protocol means, in short, a set of rules that determines the behavior. of functional units in achieving communication.Data circuit, however, consists of a pair of(73) transmission channels that provides a means of two-way data transmission. Between data switching exchanges, the data circuit may or may not include data circuit-terminating equipment (DCE), depending on the type of(74) used at the data switching exchange. Between a data station and a data switching exchange or data concentrator, the data circuit includes the DCE at the data station end, and may include equipment(75) to a DCE at the data switching exchange or dam concentrator location.; You want your Catalyst switch to implement a switching method that holds a packet in its memory until the data portion of the respected packet reaches the switch.Which method should you employ on your Catalyst switch?（）; As a TestKing trainee you are required to set the default gateway on a Cisco switch to the IP address of 192.168.1.115. Which IOS command should you use?（）; As a Ezonexam trainee you are required to set the default gateway on a Cisco switch to the IP address of 192.168.1.115. Which IOS command should you use?; Assuming the default switch configuration,which approach should you use to configure the extended vlan range(1006 through 4094) on a cisco catalyst 3750 series switch?（）; Routers perform the decision process that selects what path a packet takes. These （） layer devices participate it the collection and distribution of network-layer information, and perform Layer 3 switching based on the contents of the network layer （） of each packet. You can connect the routers directly by point-to-point （） or local-area networks, or you can connect them by LAN or WAN switches. These Layer 2 switches unfortunately do not have the capability to hold Layer 3 （） information or to select the path taken by a packet through analysis of its Layer 3 destination address. Thus, Layer 2 switches be involved in the Layer 3 packet （） decision process.; The network administrator has discovered that the power supply has failed on a switch in the company LAN and that the switch has stopped functioning. It has been replaced with a Cisco Catalyst 2950 series switch. What must be done to ensure that this new switch becomes the root bridge on the network?（）; The network administrator has discovered that the power supply has failed on a switch in the company LAN and that the switch has stopped functioning. It has been replaced with a Cisco Catalyst 2950 series switch.What must be done to ensure that this new switch becomes the root bridge on the network?（）; A Ezonexam Ethernet switch receives a unicast frame. with a destination MAC that is listed in the switch table. What will this switch do with the frame?; Given the output of the Floor3 switch, what statement describes the operation of this switch（）。

广告位招租WX:84302438

题库考试答案搜索网

免费的网站请分享给朋友吧