将对接焊缝分为（）级。不同质量等级的焊缝，质量要求不一样，规定采用的检验比例、验收标准也不一样。

三级对接焊缝应按二级焊缝标准进行外观质量检验。

焊缝质量等级分为一、二、三级，一级、二级焊缝为全熔透焊缝，要进行探伤检验；三级焊缝为非熔透焊缝或角焊缝，不进行探伤检验。

对焊透的对接焊缝，当满足下列条件之一者，强度已满足，无需进行强度验算：①焊缝质量得以保证（即一、二级焊缝）;②焊缝有效截面不低于焊件有效截面（即采用引弧板）。

Every deliberate act of wrongdoing by the master or any of the crew against the ship or cargo，without the authorization or privity of the Shipowner or his agent，is（）.

（）, or drum is used for hauling in or letting out the wires or ropes which will fasten the ship to the shore.

A salvor may be（）the whole or part of the payment due under Salvage Convention to the extent that the salvage operations have become necessary or more difficult because of fault or neglect on his part or if the salvor has been guilty of fraud or other dishonest conduct.

The （） is used for hauling in or letting out the wires or ropes.

Vessels must be（）valid certificate of nationality or certificated of registry or license.

逻辑运算符（AND、NOT、OR）的运算顺序是AND→OR→NOT。

根据《钢结构工程施工质量验收规范》，对于工厂制作焊缝，一、二级焊缝探伤比例的计数原则是：应按每条焊缝计算百分比，且探伤长度应不小于（）mm，当焊缝长度不足（）mm时，应对整条焊缝进行探伤。

逻辑运算符（AND、NOT、OR）的运算顺序是AND→OR→NOT。