首页/ 题库 / [单选题]On your OSPF network的答案

On your OSPF network, routers TK1 and TK2 belong to the same Ethernet network. However, they are unable to establish an adjacency over this link. While troubleshooting this problem, you issue the "show ip ospf interface Ethernet 0"command on each router. The output from these commands is displayed below: What is the underlying cause of the routers failing to become adjacent?（）

单选题
2022-05-24 00:07
A、The OSPF area is misconfigured.
B、The priority on TK2 should be set lower.
C、The cost on TK2 should be set lower.
D、The hello and dead timers are misconfigured.
E、You need to add a backup designated router to the network.
F、The OSPF process ID numbers do not match.
查看答案
正确答案
D
试题解析
标签： CMS专题
感兴趣题目
On point-to-point networks, OSPF hello packets are addressed to which address（）。
A router leams about a remote network from EIGRP.OSPF. and a static route. Assuming all routing protocols are using their default administrative distance, which route will the router use to forward data to the remote network?（）
A router learns about a remote network from EIGRP, OSPF, and a static route. Assuming all routing protocols are using their default administrative distance, which route will the router use to forward data to the remote network（）。
On your OSPF network, routers TK1 and TK2 belong to the same Ethernet network. However, they are unable to establish an adjacency over this link. While troubleshooting this problem, you issue the "show ip ospf interface Ethernet 0"command on each router. The output from these commands is displayed below: What is the underlying cause of the routers failing to become adjacent?（）
On your OSPF network, routers TK1 and TK2 belong to the same Ethernet network. However, they are unable to establish an adjacency over this link. While troubleshooting this problem, you issue the "show ip ospf interface Ethernet 0"command on each router. The output from these commands is displayed below: What is the underlying cause of the routers failing to become adjacent?（）
What is the OSPF default frequency,in seconds,at which a cisco router sends hello packets on a multi-access network?（）
Your network has a mixture of Fast Ethernet and Gigabit Ethernet links. What needs t o be done to ensure optimal data routing when using OSPF?（）
Interface ge-0/0/2.0 of your router is attached to the Internet and is configured with an IP address and network mask of 71.33.252.17/24. A host with IP address 10.20.20.1 is running an HTTP service on TCP port 8080. This host isattached to the ge-0/0/0.0 interface of your router. You must use interface-based static NAT to make the HTTP service on the host reachable from the Internet. On which IP address and TCP port can Internet hosts reach the HTTP service?（）
Which OSPF router will advertise a Type 2 network LSA for a broadcast network segment?（）
What is the purpose of the OSPF router ID in a OR/BOR election?（）
Which of the following is an OSPF configuration parameter that is used on an ABR, but not on an internal router？（）
You are the network administrator at TestKing. You need to perform password recovery on Router TK1. What must you modify in the password recovery process?（）
相关题目

Refer to the exhibit. OSPF is configured on all routers in the network. Area 5 is configured as an NSSA areA. The RIPv2 routes are redistributed into the OSPF domain on router R5. What two types of LSAs will be originated by router R5?（）
A new network has been configured using OSPF as the routing protocol. With which network type will OSPF establish router adjacencies but not perform the DR/BDR election process?（）
On what kinds of networks does OSPF elect a backup designated router?（）
On what kinds of networks does OSPF elect a backup designated router?（）
You are a senior network administrator at TestKing, and while performing thepassword recovery procedure on your 2500 series Cisco router, you type in thefollowing command:o/r 0x2142What is the purpose of this command?（）
You are a senior network administrator at Ezonexam, and while performing the password recovery procedure on your 2500 series Cisco router, you type in the following command:o/r 0x2142What is the purpose of this command?
The maximum number of routers per OSPF area typically depends on which three factors?（）
After making some network changes you power off and then power on your Cisco router. What sequence of events occurs when a router is powered up?（）
After making some network changes you power off and then power on your Cisco router named VE1. What sequence of events occurs when VE1 is powered up?
Which commands are required to properly configure a router to properly configure a router to run OSPF and to add network 192.168.16.0/24 to OSPF area 0?（）

You are an administrator of a switched network and your goal is to reduce some of the administrative overhead on your network. You plan on achieving this by configuring a new VLAN for each department in your network. However, you need to share the VLAN information across numerous switches throughout your network.
Which of the following would allow you accomplish this?（）
Which parameter or parameters are used to calculate OSPF cost in cisco routers?（）
Personal firewall is a technology that helps(66)intruders from accessing data on your PC via the Internet or another network, by keeping(67)data from entering or exiting your system.Hackers do not just target national security organizations for(68): They want your tax returns, network passwords, or bank account numbers. And you do not want the FBI kicking in your door because someone hijacked your PC to(69)in the latest denial-of-service attack on the Internet. Now that "always-on" broadband connections such as cable modems and digital subscriber line are becoming more popular, home users are at risk. Fortunately, you can protect your data. Firewalls can block(70)attacks and protect your PC from outside threats.
You have just configured a static default route on router TK1. What is the purpose of a default route?（）
When verifying OSPF virtual link problems, which is an important item to check on the two transit OSPF routers?（）
On point-to-point networks, OSPF hello packets are addressed to which address?（）
You are the network administrator for The network consists of a single Active Directory domain named All network servers run Windows Server 2003. A member server named TK1 contains a large number of files that are frequently accessed by network users. Users report unacceptable response times on TK1. You compare the current performance of TK1 to a system performance baseline that you created several weeks ago. You decide that TK1 needs a higher-performance network adapter. After you add the appropriate network adapter, users report satisfactory performance. You need to gather new server performance data so you can establish a new performance baseline for TK1. You open the Performance console. What should you do next?（）
You are a systems engineer for your company. Your company has 20，000 users in a large campus environment located in Los Angeles. Each department in the company is located in its own building. Each department has its own IT staff， which is responsible for all network administration within the building.   The company’s network is divided into several IP subnets that are connected to one another by using dedicated routers. Each building on the company’s main campus contains at least one subnet， and possibly up to five subnets. Each building has at least one router. All routers use RIP version 2 （RIPv2） broadcasts.   The company acquires a new business unit located in Denver. The Denver office has 25 users. The network in the Denver office is connected to the network at the main campus by using a leased frame relay connection. The network administrator at the Denver office installs a Windows Server 2003 computer and configures Routing and Remote Access on this server. The network administrator at the Denver office configures this server as a router and implements RIPv2 in Routing and Remote Access.   Later， the Denver administrator reports that his router is not receiving routing table updates from the routers on the main campus network. He must manually add routing entries to the routing table to enable connectivity between the locations. You investigate and discover that the RIPv2 broadcasts are not being received at the Denver office. You also discover that no routing table announcements from the Denver office are being received on the main campus network.  You need to ensure that the network in the Denver office can communicate with the main campus network and can send and receive automatic routing table updates as network conditions change.   What should you do on the router in the Denver office？（）
Refer to the exhibit. OSPF is configured on all routers in the network. Area 5 is configured as an NSSA areA. The RIPv2 routes are redistributed into the OSPF domain on router R5. What two types of LSAs will be originated by router R5?（）
Refer to the exhibit. OSPF is configured on all routers in the network. Area 5 is configured as an NSSA areA. The RIPv2 routes are redistributed into the OSPF domain on router R5. What two types of LSAs will be originated by router R5?（）
广告位招租WX:84302438
题库考试答案搜索网

免费的网站请分享给朋友吧

题库考试答案搜索网 2022 ©

关于我们网站声明合作共赢