RTA是源DR路由器,RTB是RP路由器,组播源向RTA发送组播数据,但RTB上看不到通过PIM register报文想起注册的组播源source,可能得原因有()
During a recent OSPF election among three routers, RTA was elected the DR and RTB was elected the BDR, as seen in the graphic. Assume that RTA fails, and that RTB takes the place of
the DR whi le RTC becomes the new BDR. What will happen when RTA comes back online?()
下面是路由器RTA的部分配置:
[RTA-ospf-100]ospf 100
[RTA-ospf-100]silent-interface gigabitethernet1/0/0
对于此部分配置描述错误的是()
在MSR路由器RTA上执行displaospfvlink命令,路由器输出如下:
OSPFProcess100withRouterID3.3.3.3
VirtualLinks
Virtual-linkNeighbor-ID->2.2.2.2,Neighbor-State:FullInterface:20.0.0.1(GigabitEthernet0/1)
Cost:1State:P-2-PTpe:VirtualTransitArea:0.0.0.1
Timers:Hello10,Dead40,Retransmit5,TransmitDela1
从以上输出可以判断()。
免费的网站请分享给朋友吧