首页/ 题库 / [单选题]In a large, low-spee的答案

In a large, low-speed diesel engine the clearance between the piston crown and cylinder head is found to be excessiveIn order to correct for this, you should（）

单选题
2022-03-03 20:47
A、build up the piston crown by metal spraying
B、build up the cylinder head by metal spraying
C、insert shims between the crankpin bearing box and the connecting rod foot
D、install a thinner head gasket
查看答案
正确答案
C
试题解析
标签： 船舶电气与船舶安全
感兴趣题目
Proper lubrication of the main bearing is more easily obtained in a single acting four-stroke/cycle diesel engine than in a single acting two-stroke/cycle diesel engine because （）
Burning fuel with a high sulfur content in a diesel engine will （）
Burning fuel with a high sulfur content in a diesel engine will （）
The main function of tie rods in the construction of large, low speed diesel engines is to（）.
Friction, engine wear and oil consumption in a diesel engine are directly related to the （）.
On a large low-speed main propulsion diesel engine, lower main bearing wear is usually measured by using a/an （）
In large, low-speed, main propulsion diesel engine, position ring groove wear usually occurs at the（）
If a crankcase explosion occurs in a diesel engine, you should stop the engine and（）
Which of the conditions listed could cause the cylinder relief valves on a large, low-speed, propulsion diesel engine to lift?（）
The is employed to warm up a large diesel engine before its starting（）
In a diesel engine, a positive displacement type blower is usually （）
If a crankcase explosion occurs in a diesel engine, you should stop the engine and（）
相关题目
Defective atomizer in a diesel engine will lead to（）.
Defective air cooler in a diesel engine will lead to （）.
Defective governor in a diesel engine may lead to （）.
Defective timing gear in a diesel engine may lead to （）.
Compared to a naturally aspirated diesel engine, a supercharged diesel engine has（）
Turbulence in a diesel engine cylinder is of major importance in providing （）.
A change in the degree of fuel atomization in a diesel engine would most greatly affect （）.
The highest pressure in a diesel engine cylinder normally occurs （）.
A diesel engine is supercharged in order to（）
Lubricating oil used in a diesel engine serves to（）
Worn main bearings in a diesel engine can result in （）
Low compression in a diesel engine could be caused by（）
A drop in compression pressure in one cylinder of a diesel engine can be caused by（）
Poor combustion in a diesel engine can be caused by （）.
Cast iron pistons used in large propulsion diesel engines are constructed with （）
Excessively worn, or polished ends on a diesel engine valve spring, indicate（）
A diesel engine burns （） a gasoline engine of the same capacity in the same period of time.
Stating a large propulsion diesel engine using diesel fuel during cold weather conditions can be made easier by （）
Starting a large low-speed propulsion diesel engine on diesel fuel during cold weather conditions, will be made easier by （）
In a large, low-speed diesel engine the clearance between the piston crown and cylinder head is found to be excessiveIn order to correct for this, you should（）
广告位招租WX:84302438
题库考试答案搜索网

免费的网站请分享给朋友吧

题库考试答案搜索网 2022 ©

关于我们网站声明合作共赢