As the air passes through the charge air cooler, its temperature may be reduced and moisture condensed, with the condensate in danger of being carried into the engineSo a water separator should be mounted beneath the bottom part of the engine inlet manifoldA water separator is used in order to （）. -题库考试答案搜索网

As the air passes through the charge air cooler, its temperature may be reduced and moisture condensed, with the condensate in danger of being carried into the engineSo a water separator should be mounted beneath the bottom part of the engine inlet manifoldA water separator is used in order to （）.

单选题

2022-05-21 11:48

A、keep the air from being carried into the engine
B、keep the moisture from being condensed
C、keep the danger from being carded into the engine
D、take away the condensate from the air

查看答案

正确答案

D

试题解析

标签：船舶辅助机械

感兴趣题目

As the temperature of the air reaches the dew point，（）.

Usually we take the cooling effect of the air flown through the cylinder during the overlap period as（）

The efficiency of turbocharge system is increased by fitting a charge air cooler （） the compressor.

Which of the following problems could cause air to blow out through the inlet air filter of a running compressor?（）

The basic process of biological sewage treatment consists of the liquor either by bubbling air through it or by agitating the surface（）

The fresh air coming in through the inner air ports, is compressed by（） to a higher pressure.

When the air charge contacts with the cylinders and pistons and mixes with the residual gases, it will（）

Charging is the filling of the engine cylinder with a supply or charge of fresh air （） compression.

The loss of the diesel engine cylinder air charge through leaky valves, piston rings, worn or scored liners, would be indicated by which of the following sets of conditions?（）

（） is used for cylinder and cylinder head, the salt water is used for cooling the lubricating oil, the fresh water in the coolers and the charging air in the air cooler.

As the air passes through the charge air cooler, its temperature may be reduced and moisture condensed, with the condensate in danger of being carried into the engineSo a water separator should be mounted beneath the bottom part of the engine inlet manifoldA water separator is used in order to （）.

The air compressor pumps air to the （）.

相关题目: The air filter is fixed in the （） of an air compressor.; 第二组Under normal operation, some lubrication oil mist may be discharged from the air compressor to the air start system. This oil may be from excess compressor cylinder lubrication, from faulty oil scraper rings, or may even be suspended oil vapor contaminating the engine room atmosphere and drawn in at the compressor suction. Oil discharge is kept to a minimum by draining the after cooler, air receiver and starting system. If small quantities of lubrication oil do get passed into the starting air system, they will deposit as thin moist film over internal pipe surfaces but are not readily combustible. If a cylinder non-return valve leak while the engine is in operation, some hot gas, possibly with unburned fuel and cylinder lubrication oil, may be blown through the valve to the adjacent air manifold. With further heating from the leaky valve, this, together with the already deposited oil film, will carbonize and form. incandescent carbon. If starting air is applied to the system while still hot, the high pressure air coming into contact with the burning carbon may cause an explosion. Such an explosion will cause a flame to pass back through the air start pipe system, evaporating the deposited oil film and igniting it in the presence of air. Very high velocities and shockwaves are generated which may rupture pipes and fittings.Alternatively, if excessive oil has entered the air start system, a mixture of air and oil droplets may be discharged through the open cylinder non-return valve during starting. This spray may ignite due to high temperatures in the cylinder, causing a flame through the still open valve to the air manifold.To prevent an explosion, air start valves must be correctly maintained and lubricated to ensure correct timing and free movement with positive closing. Oil in the system must be kept to a minimum, pipe lines must be drained and cleaned internally when necessary and oil discharge from air compressors must be kept to a minimum by good maintenance.The passage is mainly about; If a four-stroke/cycle diesel engine is started by injecting air into the cylinder, the pistons receiving the charge of starting air must be（）; The forced draught fan should be started and air passed through the furnace for several minutes to “（）” it of any exhaust gas or oil vapors.; As the temperature for a given mass of air increase, the（）.; As the temperature for a given mass of air increases，the（）.; The air charge leaving an intercooler, or after-cooler of an air compressor can be expected to be （）.; The air in the lungs changes through ________.; The air compressor pumps air to the （）.; The air compressor pumps air to the（）.; The compressed air is supplied by （） to the air reservoirs.; The pressurized air is usually cooled to increase the charge air （）.; Pump up the starting air reservoirs to their maximum pressure and （）the air reservoirs and air system.; The figure that the volume of air at BDC is divided by the volume of air at TDC is termed as（）.; The quantity of cooled air delivered by an air conditioning unit should （） the sum of the quantity of air re-circulated to the unit and the quantity mechanically exhausted.; As the temperature of an air mass decreases，the（）.; When the dew point of the outside air is lower than or equal to the dew point of the air in the cargo hold，you should（）.; It is very necessary that each cylinder （） before the charged air is compressed.; It is very necessary that each cylinder （） before the charged air is compressed.; The extended aeration process consists of （） the liquor either by bubbling air through it or by agitating the surface.

广告位招租WX:84302438

题库考试答案搜索网

免费的网站请分享给朋友吧