首页/ 题库 / [单选题]Waste oil from the l的答案

Waste oil from the lube oil sumps of machinery may NOT be ().

单选题
2022-01-03 02:53
A、drained into the vessels bilges
B、reclaimed for other uses
C、held in a slop tank
D、purified and then reused
查看答案

正确答案
A

试题解析

相关题目

When fuel oil is accidentally missed with lube oil which of the following processes can be used to separate them?()
Ⅰ.filtering
Ⅱ.settling

The quality of the fuel oil and lube oil (), Im afraid.
The most common cause of lowering the crankcase lube oil flash point is ().
A condition that can increase the foaming tendency of lube oil is ()
According to Annex I of MARPOL 73/78, oily waste from cargo tanks of oil tankers can be discharged when the ship is more than()away from the nearest land.
Fueling results in the collection of waste oil in drip pans and containers. Which is an approved method of disposing of the waste oil? ()
Waste oil from the lube oil sumps of machinery may NOT be ().
Just after stopping the engine while the oil is still circulating.Check that uniform oil jets appear from all the oil outlet grooves in the crosshead bearing lower shell and the guide shoes.The oil flow from () must be compared from unit; there should be a similarity in the flow patterns.
When separating the lube oil without additive, it is usually cleaned with hot water; the aim is to remove () from it.
The lube oil to lubricate the surfaces of the cylinder liners is spread over by the ().
These acid residues must be prevented from entering the crankcase, otherwise the lube oil would be()
The primary duty of lube oil is to reduce () between the working parts of an engine.
To receive oil residues from the purification of fuel and lubricating oils in the machinery spaces, what kind of tank(s) should be provided on board?()
In the case of new crude oil tankers,the additional ballast permitted shall be carried in cargo tanks only if such tanks have been()before departure from an oil unloading port or terminal.
A sudden decrease in the diesel engine lube oil viscosity could be an indication of()
For a main diesel engine the lube oil in the bearings is drawn from (), usually located in the bedplate.
Lube oil pumps taking suction from the sump of most small marine engines are usually ().
Just after stopping the engine while the oil is still circulating.Check that uniform oil jets appear from all the oil outlet grooves in the crosshead bearing lower shell and the guide shoes.The oil flow from () must be compared from unit; there should be a similarity in the flow patterns.
With respect to the flow of lubricating oil through a diesel engine, the lube oil coolers are located after filters in order to ().
No oil or mixture containing oil()into singapore waters from any vessel.
广告位招租WX:84302438

免费的网站请分享给朋友吧