A lube oil sample taken from the main engine lube oil system has dark yellow opaque color.This is the result of （） -题库考试答案搜索网

A lube oil sample taken from the main engine lube oil system has dark yellow opaque color.This is the result of （）

单选题

2023-11-08 17:33

A、water contamination
B、mixing oils of two widely different viscosities
C、overheating
D、aeratio

查看答案

正确答案

D

试题解析

标签：船舶电气与船舶安全

感兴趣题目

Lube oil pumps taking suction from the sump of most small marine engines are usually （）.

Just after stopping the engine while the oil is still circulating.Check that uniform oil jets appear from all the oil outlet grooves in the crosshead bearing lower shell and the guide shoes.The oil flow from （） must be compared from unit; there should be a similarity in the flow patterns.

With respect to the flow of lubricating oil through a diesel engine, the lube oil coolers are located after filters in order to （）.

In a full flow type lube oil system, the bypass relief valve will lift due to （）

The（）may examine or re-examine the goods or take samples from them straightaway in the absence of the consignee or the consignor whenever it considers this necessary.

Excessive lube oil consumption can result from worn or broken（）

Which of the following conditions can cause excessive lube oil consumption in a diesel engine?（）

An additive used to improve the ability of a lube oil to reduce friction is known as a/an

Lube oil filters remove contaminants more efficiently if the oil being filtered is （）.

The pressure differential across a diesel engine lube oil system duplex filter should be checked to （）

Which of the listed characteristics of lube oil are the most important to the engineer from an operational standpoint?（）

A lube oil sample taken from the main engine lube oil system has dark yellow opaque color.This is the result of （）

相关题目: 为了保证船舶航行安全，首先要确定船舶的航向与位置。船舶定位方法按照参照目标可分为（　）。; 0il product samples should be taken from the（）.; The percentage of impurities in a specific fuel oil sample is determined by （）.; The quality of the fuel oil and lube oil （）, Im afraid.; Your vessel is taking on bunkers from a shore side facility, if oil begins flowing from one tank vent, which of the following actions should be taken FIRST?（）; A condition that can increase the foaming tendency of lube oil is （）; Waste oil from the lube oil sumps of machinery may NOT be （）.; Just after stopping the engine while the oil is still circulating.Check that uniform oil jets appear from all the oil outlet grooves in the crosshead bearing lower shell and the guide shoes.The oil flow from （） must be compared from unit; there should be a similarity in the flow patterns.; When separating the lube oil without additive, it is usually cleaned with hot water; the aim is to remove （） from it.; These acid residues must be prevented from entering the crankcase, otherwise the lube oil would be（）; A dirty lube oil strainer can result in（）; Where tanks are arranged for either oil or ballast （） must be fitted in the pipe so that only the ballast main or the oil transfer main connected to the tank.; The tailshaft sealing arrangement found a little lube oil leaky and caused a lot of seawater into the bearing, the step should be taken as a makeshift is（）; A mixture of 45%cetane and 55% alpha-methyl-naphthalene is found to have the same ignition delay as a sample of diesel oil √The sample can be described as having a/an（）; The percentage of impurities in a specific fuel oil sample is determined by （）.; A sudden decrease in the diesel engine lube oil viscosity could be an indication of（）; If the cooling water temperature and the lube oil temperature in a diesel engine are too high, the cause can be （）; If the cooling water temperature and the lube oil temperature in a diesel engine are too high, the cause can be （）; Oil product samples should be taken from the（）.; For a main diesel engine the lube oil in the bearings is drawn from （）, usually located in the bedplate.

广告位招租WX:84302438

题库考试答案搜索网

免费的网站请分享给朋友吧