更换角度编码器如何设定角度编码器较度?
手动摇动夹爪,找到零号夹爪,使零号爪检查块,刚刚到零号爪电眼,触发电眼刚刚亮,将角度编码器接上,检查有无缺失角度,如正常转到200度,(在角度显示器上观察)锁紧角度编码器,重复上述看有无偏差,如有偏差按上述设定.
A campus emergency ______ occur at any time of the day or night, weekend, or holiday, with little or no warning.
免费的网站请分享给朋友吧