Your vessel is at a dock taking bunkers through a pipe laid down on the dock. If oil begins to flow out of a tank vent，what should you do FIRST?（）

（）is entitled to enter into，with a shipper，any agreement，stipulation，condition，reservation or exception as to the responsibility and liability of the carrier or the ship for the loss of or damage to，or in connection with，the custody and care and handling of the goods prior to the loading on，and subsequent to the discharge from，the ship on which the goods are carried by sea.

The valve on the discharge side of a cargo pump on a tanker will usually be a（）.

The purpose of the safety relief valves installed on an auxiliary boiler is to （）.

If the relief valve on a diesel engine cylinder lifts, the cause could be due to （）

A device fitted over the discharge opening on a relief valve consisting of one or two woven wire fabrics is called a flame（）.

A device fitted over the discharge opening on a relief valve consisting of one or two woven wire fabrics is called a（）.

Which of the conditions listed could cause the cylinder relief valves on a large, low-speed, propulsion diesel engine to lift?（）

When a tug is pulling on a hawser at right angles to the ship，and the pilot wants to come ahead or astern on the ship’s engine，care must be taken that the pilot（）.

Safety valves on a boiler vent to the （）.

In setting the valves on a steam-smothering system on a tank vessel，the master control valve to cargo tanks should be（）.

In setting the valves on a steam-smothering system on a tanker，the master control valve to cargo tanks should be（）.