The cylinder oil will have to neutralize the acidic products of combustion and have good （） properties to keep the metal surfaces clean. -题库考试答案搜索网

The cylinder oil will have to neutralize the acidic products of combustion and have good （） properties to keep the metal surfaces clean.

单选题

2021-08-07 21:21

A、detergent
B、de-oiling
C、defrosting
D、demulsifying

查看答案

正确答案

A

试题解析

标签：船舶电气与船舶安全

感兴趣题目

A semisubmersible which will not remain upright and will assume a list either to port or starboard is likely to have（）.

Main engines as well as auxiliary engines operating on heavy fuel should have continuous on the lubricating oil, either according to the bypass or batch principles（）

Where tanks are arranged for either oil or ballast （） must be fitted in the pipe so that only the ballast main or the oil transfer main connected to the tank.

The charges for cleaning（）the oil pollution on sea will be to ship’s account.

When good and steady service conditions have been achieved, the running surfaces of the piston rings and cylinder liner will be（）In addition, the rings will move freely in the grooves and also be well oiled intact, and not unduly worn.

If the carrier is responsible for the damage or loss of the cargo，（）will have to pay to the insurance company.

When the ship causes oil pollution to the port, she will be（）.

船长应负责保管的船舶安全管理方面的证书有（）。 Ⅰ．符合证明； Ⅱ．符合证明的副本； Ⅲ．船舶安全管理证书； Ⅳ．船舶安全管理证书的副本。

（）, or drum is used for hauling in or letting out the wires or ropes which will fasten the ship to the shore.

Oil is supplied to the cylinder wall and （） by means of mechanical lubricators.

Fuel oil discharged to the diesel engine cylinder is atomized at the （）

Cylinder lubrication oil for low speed main propulsion diesel engines is admitted to each cylinder during （）.

相关题目: 为了保证船舶航行安全，首先要确定船舶的航向与位置。船舶定位方法按照参照目标可分为（　）。; There will usually be summaries or daily account tables for heavy oil, diesel oil, lubricating oil, and fresh water, which will be compiled（）; The cylinder oil will have to neutralize the acidic products of combustion and have good （） properties to keep the metal surfaces clean.; 第二组Under normal operation, some lubrication oil mist may be discharged from the air compressor to the air start system. This oil may be from excess compressor cylinder lubrication, from faulty oil scraper rings, or may even be suspended oil vapor contaminating the engine room atmosphere and drawn in at the compressor suction. Oil discharge is kept to a minimum by draining the after cooler, air receiver and starting system. If small quantities of lubrication oil do get passed into the starting air system, they will deposit as thin moist film over internal pipe surfaces but are not readily combustible. If a cylinder non-return valve leak while the engine is in operation, some hot gas, possibly with unburned fuel and cylinder lubrication oil, may be blown through the valve to the adjacent air manifold. With further heating from the leaky valve, this, together with the already deposited oil film, will carbonize and form. incandescent carbon. If starting air is applied to the system while still hot, the high pressure air coming into contact with the burning carbon may cause an explosion. Such an explosion will cause a flame to pass back through the air start pipe system, evaporating the deposited oil film and igniting it in the presence of air. Very high velocities and shockwaves are generated which may rupture pipes and fittings.Alternatively, if excessive oil has entered the air start system, a mixture of air and oil droplets may be discharged through the open cylinder non-return valve during starting. This spray may ignite due to high temperatures in the cylinder, causing a flame through the still open valve to the air manifold.To prevent an explosion, air start valves must be correctly maintained and lubricated to ensure correct timing and free movement with positive closing. Oil in the system must be kept to a minimum, pipe lines must be drained and cleaned internally when necessary and oil discharge from air compressors must be kept to a minimum by good maintenance.The passage is mainly about; They will have to decide what to do about the energy crisis before the oil ______.; I will give the book to ( ) wants to have it.; 船舶防火控制图集中反映了船舶消防、救生设备的安全技术性能，是保障船舶营运安全的重要性图纸。; 根据我国现行船舶最低安全配员规则，下列叙述正确的是：（）I、船舶安全配员标准是船舶配备船员的最低要求；II、中外国籍船舶都应持有海事管理机构颁发的《船舶最低安全配员证书》；III、海事管理机构如认为配员减免后无法保证船舶安全时，可不予减免或者不予足额减免；IV、船舶在航行、停泊、作业时，必须将《船舶最低安全配员证书》妥善存放在船备查; 下列关于船舶安全检查的说法中，正确的是（）。
Ⅰ、船舶接受安全检查时，陪同检查的船员引导检查人员即可
Ⅱ、船舶接受安全检查时，陪同检查的船员应按检查人员要求，调试、操纵有关设备
Ⅲ、中国籍船舶接受安全检查时出示船舶安全检查记录簿; In addition to lubricating, cylinder oil assists in forming a gas seal and contains （） which clean the cylinder liner.; Which characteristic or condition will have the greatest effect on increasing a hydraulic oils viscosity?（）; In an oily water separator the oil will travel （） to the oil collecting spaces.; Fuel oil discharged to the diesel engine cylinder is atomized at the （）; Where events have rendered performance of the contract illegal either by English law or by the law of the country in which performance was to have taken place，the Charterer will（）from the liability to provide a cargo.; The drive motor will have a brake arranged to fail-safe, ieit will （） the load if power fails or machine is stopped.; The drive motor will have a brake arranged to fail-safe, i√eit will （） the load if power fails or machine is stopped.; If the carrier is responsible for the damage or loss of the cargo，（）will have to pay to the insurance company.; Which of the following operation will have a direct impact on the rate of wear in a cylinder liner （）; The lube oil to lubricate the surfaces of the cylinder liners is spread over by the （）.; In order to keep the oil film on the cylinder liner during the running-in period, the piston rings are slightly rounded（）

广告位招租WX:84302438

题库考试答案搜索网

免费的网站请分享给朋友吧