首页
题目
TAGS
首页
/
题库
/
[单选题]Before being certifi的答案
搜答案
Before being certified by the American Bureau of Shipping,anchor chain must undergo().
单选题
2022-01-03 19:28
A、USCG inspection
B、a breaking test
C、x-ray inspection
D、spectroanalysi
查看答案
正确答案
B
试题解析
标签:
港口国检查文件及报告(PSC)
感兴趣题目
It is abnormal that when the engine is being turned by the turning gear or by hand, ().
RULE III. EXTINGUISHING FIRE ON SHIPBOARD: Damage done to a ship and cargo, or either of them, by water or otherwise, including damage by beaching or scuttling a burning ship, in extinguishing a fire on board the ship, shall be made good as general average; except that no compensation shall be made for damage by smoke or heat however caused. 根据以上条款,不能列入共同海损的是()。
Be sure to make the engine turn by () before starting and after stopping .
A declaration made by the Master before a PRC Consul,giving particulars regarding heavy weather or other incidents which may have caused damage to the vessel or cargo,through no fault of the vessel,her officers,or crew is a(n)().
The bill of lading serves as a document of title enabling the goods to be transferred from the shipper to the consignee or any other party by endorsement.The()can not be transferred to the third parties by endorsement.
Course directed by the OSC or CSS to be steered at the beginning of a search is().
Course directed by the OSC or CSS to be steered at the beginning of a search is().
Course directed by the 0SC or CSS to be steered at the beginning of a search is().
Excessive clearances in the main or crank-pin bearings will sometimes be indicated by () before any bearing knock is heard.
下列有关港口国检查的提法中,()正确。 ①PSC官员是经海事组织正式授权的执行港口国监督检查的官员; ②“检查”是PSC官员观察船舶的维护状况,产生概括性的认识并登轮检查船舶证书和文件; ③“明显理由”是船舶及其设备或其船员实质上不符合有关公约要求的证据; ④“详细检查”是当PSC官员发现有明显理由表明船舶条件、设备或船员实质上与证书不符后进行的全面检查。
A survey of refrigerated cargo,to certify that proper methods of stowage were utilized,can be conducted by the().
A survey of refrigerated cargo,to certify that proper methods of stowage were utilized,can be conducted by the().
相关题目
下列各项,属于各港口国及区域性合作协议实施港口国监控所依据的国际公约有()。
根据IMO港口国监督程序的规定,外国籍船舶应接受港口国授权的官员进行港口国监督检查,下列哪项不属于监督检查的程序()。
The maritime labour certificate shall be issued to()by the competent authority,or by a recognized organization duly authorized for this purpose.
In the northern hemisphere, the largest waves or swells created by a typhoon or hurricane will be located().
When a vessel sees the other ahead or nearly ahead,by night she could see the masthead lights of the other in a line or nearly in a line or both side lights,()shall be deemed to exist.
Inquiries()the condition of the patients may be made personally or by telephone.
Misalignment of the drive shaft and propeller shaft flanges can be detected by using a dial indicator or ().
Misalignment of the drive shaft and propeller shaft flanges can be detected by using a dial indicator or ()
If the state of the goods at the time they were handed over to the consignee has been the subjectof a joint survey or inspection by the parties,notice in writing()be given of loss or damage ascertained during such survey or inspection.
Although the Shipowner may be responsible for the loss or damage to the goods,his liability may be limited by the terms of().
Before being certified by the American Bureau of Shipping,anchor chain must undergo().
After the SSP being checked by a duly authorized officials of a port State, whom should be reported to by the ship immediately?
Assuming you build networks to exact specifications, what is the recommended maximum length a 10BaseT cable can be before it has to be segmented or repeated?()
Assuming you build networks to exact specifications, what is the recommended maximum length a 10BaseT cable can be before it has to be segmented or repeated?
Damage caused by lighting,a storm,or a sudden gust of wind may be within the exception of ().
Any friction fit, tightness or adhesion of the part of any load being lifted should be broken by wedge or tapping and not by increasing the load on the applianceAccording to this sentence, ()
Before welding in a tank that has carried petroleum products,the tank must be certified by ().
The Declaration of Inspection made before oil transfer operations must be signed by the ().
Before welding is permitted on a fuel tank, it must be certified or declared ()
The starting air bottle should be pumped up to maximum pressure by the () before start of the engine.
广告位招租WX:84302438
题库考试答案搜索网
免费的网站请分享给朋友吧